CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
DIY vac distillation system using peltier thermoelectric heat pumps Options
 
The Day Tripper
#1 Posted : 4/9/2012 9:02:16 PM

Rennasauce Man


Posts: 853
Joined: 27-May-2011
Last visit: 25-Feb-2019
Location: A Pale Blue Dot orbiting a GV2 Yellow Dwarf fusion powered Luminous Ball of Plasma at 30km/s
I've been playing around with this idea for a few days, and would like some feedback on it. Basically it involves using a 500ml Erlenmeyer flask, a few peltier heat/cool plates, a few diy copper pipe condensers, a 500ml vacuum flask, a water cooling system, and a vac source.

The idea is to use the peltier plates heating and cooling abilities, to both heat the flask in which you have the liquid to be distilled, and attach GPU/CPU water blocks, and a small pump to circulate water to the condensers on the cold side of the plates.

Uses rubber bungs, and copper tubing to connect it all instead of glass, as well as two diy condensers via copper coils in water baths. One to condense the solvent, and another to ensure no vapor gets into your vac source. Set up a water circulation system with a small pump, and cool the condensers via the water blocks on the cold side of the peltier plates.

Since its going to be a vac setup, temps don't really need to be very high, ideally as low as possible while still achieving condensation. Variable power input to the plates, and the pump (slower circulation/less cooling), could control temps using an ir thermometer.

Even if diy copper condensers are not used, and you go all glass, i don't see why using the heating and cooling power of peltier plates could not be taken advantage of here. Could even be applied to a soxhelt setup.

Basically what I'm really asking about is if peltier plates are a viable option to use as heat/cold sources in a distillation setup, whether it be all glass, vacuum, soxhelt, or diy with copper coil condensers.

Any reason why this would not work? Safety concerns about anything?

Obviously it would be tested using water a few times before trying anything flammable/volatile, and safety would be stressed here, but i don't see any flaws that would prevent this from working.

Feedback on this idea would be appreciated Smile




The Day Tripper attached the following image(s):
Sketch.jpg (417kb) downloaded 148 time(s).
"let those who have talked to the elves, find each other and band together" -TMK

In a society in which nearly everybody is dominated by somebody else's mind or by a disembodied mind, it becomes increasingly difficult to learn the truth about the activities of governments and corporations, about the quality or value of products, or about the health of one's own place and economy.
In such a society, also, our private economies will depend less upon the private ownership of real, usable property, and more upon property that is institutional and abstract, beyond individual control, such as money, insurance policies, certificates of deposit, stocks, etc. And as our private economies become more abstract, the mutual, free helps and pleasures of family and community life will be supplanted by a kind of displaced citizenship and by commerce with impersonal and self-interested suppliers...
The great enemy of freedom is the alignment of political power with wealth. This alignment destroys the commonwealth - that is, the natural wealth of localities and the local economies of household, neighborhood, and community - and so destroys democracy, of which the commonwealth is the foundation and practical means.โ€ - Wendell Berry
 

Explore our global analysis service for precise testing of your extracts and other substances.
 
Dr_Sister
#2 Posted : 4/13/2012 2:53:42 AM

Synaptic cleft explorer

Chemical expert | Skills: Chemistry, Horticulture, Yoga, Meditation, Graphic/web design, MarketingSenior Member | Skills: Chemistry, Horticulture, Yoga, Meditation, Graphic/web design, Marketing

Posts: 299
Joined: 10-Dec-2010
Last visit: 13-Feb-2014
Location: good question
Flat bottomed flasks, with the exception of filtration flasks, will not stand up to high vacuum, they will implode. And filtration flasks are so thick they don't heat evenly and often fracture due to heat stress. This can happen when heating or if they cool to quickly or someone makes the mistake of trying to cool them by immersing them in cold water.

Its unlikely to be a safety hazard unless you are distilling a flammable solvent, but can be incredibly discouraging at the end of a long synthesis. Speaking from painful personal experience, gained the hard way. Distillation rigs can be purchased inexpensively on eBay, btw.

I don't know enough about peltier plates to offer an opinion on that aspect of you plan.

light and blessings
Sistah
 
InMotion
#3 Posted : 6/1/2012 8:55:47 PM
DMT-Nexus member

Senior Member | Skills: 3D programming, Mathematician (if you need help with algebra to differential equations I'm available), SKilled Engineer

Posts: 473
Joined: 07-Aug-2011
Last visit: 10-Jan-2014
As dr. sister said don't use flat bottom flasks under vacuum. Copper condenser will work in some cases so long as acid/base and funky organics aren't being past through. Make sure you're vacuum pump can handle the approximate volume of air in the entire set-up if you are going to be building condensers and such(cubic feet/liter per second I believe is the figure that concerns this).

Also you would like to have an adequate cold trap so you don't wreck your vacuum.This is a cold air-tight(of course) vessel between your collection flask and your vacuum. It is cooled either by salt/water or something more elaborate such as dry-ice/acetone depending on what is being distilled.

A way to get around using a flat surface is to use a proper pot/pan/heat resistent dish filled with water or non-flammable oil. If you can heat this to an adequate temperature you can simply suspend your distillation flask half way into the oil/water and go right ahead! This is called an oil bath or a hot water bath.

Another concern and reason to go all glass as dr. sister has said is you can use a 'pig' or distillation receiver to switch fractions that are collecting without breaking the vacuum. If you are simply ripping/recycling high boiling solvents(xylene, toluene, limonene, acetophenone) this is of no concern.
 
 
Users browsing this forum
Guest

DMT-Nexus theme created by The Traveler
This page was generated in 0.028 seconds.