CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
Vacuum source using refrigerator compressor Options
 
Rivea
#1 Posted : 8/10/2010 4:10:03 AM

No.. that can't be...

Senior Member | Skills: Harmalas, A/B Extraction, Sonication, Sterile Processing, Hardware design, Craftsman

Posts: 493
Joined: 21-May-2010
Last visit: 04-May-2024
Location: The assylum
I want to do some vacuum distillations to reduce the boiling temperature of some solvents. I had an old working refrigerator compressor laying around in my shop. To regulate the amount of vacuum applied to the distillation apparatus, I have provided a needle valve and a large vacuum gauge. I have invested about $50 into the project for a large gauge, an accumulator to prevent fluid from being sucked into the compressor, along with some copper fittings and pipe.

I have not tried this beast yet for distillations, but it does pull a damn hard vacuum at about 29.5 inches Hg. I have used it to evacuate an auto A/C unit that I repaired, and it worked beautifully.

I will report on its use in a distillation in the near future. Here are a couple of photos if anyone is curious about building one similar to it.
Rivea attached the following image(s):
PICT1421.JPG (253kb) downloaded 108 time(s).
PICT1417.JPG (235kb) downloaded 111 time(s).
Everything mentioned herein has been deemed by our staff of expert psychiatrists to be the delusional rantings of a madman who has been treated with Thorazine who is hospitalized within the confines of our locked facility. This patient sometimes requires the application of 6 point leather restraints and electrodes at the temples to break his delusions. Therefore, take everything mentioned above with a grain of salt...
 

Live plants. Sustainable, ethically sourced, native American owned.
 
Oncewas
#2 Posted : 8/10/2010 4:17:37 AM
DMT-Nexus member

Senior Member

Posts: 341
Joined: 15-Oct-2009
Last visit: 11-Oct-2012
That's awesome! Looks nice and solid man. I love when an idea is born into a creation cool stuff Smile. 29.5 inches of mercury is solid! Humms like a refrigerator nice and quiet. Dang I need to get myself an old refrigerator Razz.

Very happy
 
Xt
#3 Posted : 8/10/2010 9:52:06 AM

.

Senior Member

Posts: 981
Joined: 24-Dec-2009
Last visit: 13-Oct-2022
Looks nice and vintage... very 'steampunk'. Top work!

“Right here and now, one quanta away, there is raging a universe of active intelligence that is transhuman, hyperdimensional, and extremely alien... What is driving religious feeling today is a wish for contact with this other universe.”
― Terence McKenna
 
Crystalito
#4 Posted : 8/10/2010 1:29:44 PM
DMT-Nexus member

Senior Member

Posts: 351
Joined: 25-Jul-2009
Last visit: 25-May-2016
Location: Europe
Could you please provide some general instructions on the building of such a device? I have seen some instructions online here and there but i would like to know more, from someone with first hand experience.
 
Trickster
#5 Posted : 8/13/2010 12:38:13 AM

DMT-Nexus member

Chemical expert

Posts: 764
Joined: 18-Jan-2008
Last visit: 20-Mar-2023
rivea wrote:
I want to do some vacuum distillations to reduce the boiling temperature of some solvents. I had an old working refrigerator compressor laying around in my shop. To regulate the amount of vacuum applied to the distillation apparatus, I have provided a needle valve and a large vacuum gauge. I have invested about $50 into the project for a large gauge, an accumulator to prevent fluid from being sucked into the compressor, along with some copper fittings and pipe.


Nice design. Those I saw before were quite crudely made.

A word of caution. There is a known issue with vacuum pumps made of refrigerator pumps - lubrication. It is not a problem if a liquid coolant is used because a small amount of oil is added to it. But if you run it dry for some time it may seize.
Do not seek the truth, just drop your opinions.
 
Rivea
#6 Posted : 8/13/2010 3:18:23 AM

No.. that can't be...

Senior Member | Skills: Harmalas, A/B Extraction, Sonication, Sterile Processing, Hardware design, Craftsman

Posts: 493
Joined: 21-May-2010
Last visit: 04-May-2024
Location: The assylum
Trickster wrote:
rivea wrote:
I want to do some vacuum distillations to reduce the boiling temperature of some solvents. I had an old working refrigerator compressor laying around in my shop. To regulate the amount of vacuum applied to the distillation apparatus, I have provided a needle valve and a large vacuum gauge. I have invested about $50 into the project for a large gauge, an accumulator to prevent fluid from being sucked into the compressor, along with some copper fittings and pipe.


Nice design. Those I saw before were quite crudely made.

A word of caution. There is a known issue with vacuum pumps made of refrigerator pumps - lubrication. It is not a problem if a liquid coolant is used because a small amount of oil is added to it. But if you run it dry for some time it may seize.


Trickster,

You're right about oiling. Normally in its closed loop operation in a refrigerator some of the lubricant circulates through the entire closed system (compressor, condenser, capillary tube, and evaporator). Occasionally one needs to inject some refrigerant lube into the compressor input port to avoid seizing the compressor. It need be only a minimal amount of lube. I have run this compressor perhaps 20 times over the last 15 years and have not lubed it. I have used it to primarily to evacuate auto A/C systems which takes a couple of hours. To avoid seizing it I'll put a 1/2 ounce of lube in the inlet port prior to its next use.

If the compressor is from a refrigerator prior to 1994 in the US, it used R12 refrigerant and mineral oil based lube. Post 1994 the systems started using R-134A refrigerant and PAG type lubricant.
Everything mentioned herein has been deemed by our staff of expert psychiatrists to be the delusional rantings of a madman who has been treated with Thorazine who is hospitalized within the confines of our locked facility. This patient sometimes requires the application of 6 point leather restraints and electrodes at the temples to break his delusions. Therefore, take everything mentioned above with a grain of salt...
 
 
Users browsing this forum
Guest

DMT-Nexus theme created by The Traveler
This page was generated in 0.040 seconds.