We've Moved! Visit our NEW FORUM to join the latest discussions. This is an archive of our previous conversations...

You can find the login page for the old forum here.
CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
12NEXT
My first ACRB Ext! Not sure how stoked to be. Options
 
Jailbird5000
#1 Posted : 2/1/2015 3:58:22 AM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
So I did my first extraction last night, took about 7 hours and I was worried it would fail. Used powdered bark found and Earthwalkers' take on Cybs tek. All went super well except at one point during the clean up I accidentally added too much water to the bottle and didn't have enough room for the full amount of solvent. I just sucked some out and moved on. I did use a HDPE jug for the initial soup and I won't be doing that again with this tek. My biggest fear for my first time was shattering a jar of caustic lye all over myself so I felt safer with plastic. However in this tek, the step of dissolving the lye in water before tossing it in the soup made me feel way better about that. All my final pulls went into a 8x6 dish and i was thinking it would be a failure because it was completely clear. I thought I should see some crystals or something form but got nothing. Let it freeze over night and woke up pleasantly surprised! It's been freezing 16 hours now, I'll try to post a pic. Not sure what this yield will be but i feel lucky to have anything for my first attempt. Looks like some pics ive seen but crystals aren't really that big. Should I let it freeze another night ya think?
 

Explore our global analysis service for precise testing of your extracts and other substances.
 
concombres
#2 Posted : 2/1/2015 4:11:22 AM

DMT-Nexus member


Posts: 1311
Joined: 29-Feb-2012
Last visit: 18-Jul-2023
Jailbird5000 wrote:
So I did my first extraction last night, took about 7 hours and I was worried it would fail. Used powdered bark found on ebay and Earthwalkers' take on Cybs tek. All went super well except at one point during the clean up I accidentally added too much water to the bottle and didn't have enough room for the full amount of solvent. I just sucked some out and moved on. I did use a HDPE jug for the initial soup and I won't be doing that again with this tek. My biggest fear for my first time was shattering a jar of caustic lye all over myself so I felt safer with plastic. However in this tek, the step of dissolving the lye in water before tossing it in the soup made me feel way better about that. All my final pulls went into a 8x6 dish and i was thinking it would be a failure because it was completely clear. I thought I should see some crystals or something form but got nothing. Let it freeze over night and woke up pleasantly surprised! It's been freezing 16 hours now, I'll try to post a pic. Not sure what this yield will be but i feel lucky to have anything for my first attempt. Looks like some pics ive seen but crystals aren't really that big. Should I let it freeze another night ya think?


Upload & use thumbnails. Also you should have edited your first post with the same name & just attached the picture. Double posting is sloppySmile
 
Jailbird5000
#3 Posted : 2/1/2015 4:14:01 AM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
Yeah I didn't mean to do that. I didn't that first post went up cuz my internet went screwy or something. Sorry
 
concombres
#4 Posted : 2/1/2015 4:17:10 AM

DMT-Nexus member


Posts: 1311
Joined: 29-Feb-2012
Last visit: 18-Jul-2023
Jailbird5000 wrote:
Yeah I didn't mean to do that. I didn't that first post went up cuz my internet went screwy or something. Sorry


Its not a problem Laughing
It was meant to help u out if you were having trouble with the uploads or editing posts Thumbs up
 
Jailbird5000
#5 Posted : 2/1/2015 4:20:37 AM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
Thank you! I'll admit I am not usually an online forum person. Surprised
 
concombres
#6 Posted : 2/1/2015 4:26:45 AM

DMT-Nexus member


Posts: 1311
Joined: 29-Feb-2012
Last visit: 18-Jul-2023
You'll get the hang of it.
Really simple once you get it down Thumbs up
 
OneStepBeyond
#7 Posted : 2/1/2015 4:28:43 AM

DMT-Nexus member


Posts: 131
Joined: 20-Dec-2014
Last visit: 20-Mar-2018
Freeze precipitating doesn't generally give you large crystals, just small "snowballs". You also shouldn't mention how you acquired your bark.

Anyway, it doesn't look too bad for a first try. Was that 100g of ACRB?
Yesterday, upon the stair,
I met a man who wasn't there.
He wasn't there again today,
I wish, I wish he'd go away.
 
Jailbird5000
#8 Posted : 2/1/2015 4:30:58 AM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
OneStepBeyond wrote:
Freeze precipitating doesn't generally give you large crystals, just small "snowballs". You also shouldn't mention how you acquired your bark.

Anyway, it doesn't look too bad for a first try. Was that 100g of ACRB?


Ok I will watch that. Yes it was 100g of very fine powder.
 
Spaced Out 2
#9 Posted : 2/1/2015 4:39:08 AM

DMT-Nexus member


Posts: 989
Joined: 27-Dec-2014
Last visit: 17-Feb-2024
Shocked a mod hasn't noticed, there is NO talking of bark sources!Wut?
 
Jailbird5000
#10 Posted : 2/1/2015 10:07:41 AM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
This is me experimenting with how to put pictures in my post
Jailbird5000 attached the following image(s):
20150131_194251.jpg (2,484kb) downloaded 121 time(s).
 
Spaced Out 2
#11 Posted : 2/1/2015 1:41:33 PM

DMT-Nexus member


Posts: 989
Joined: 27-Dec-2014
Last visit: 17-Feb-2024
Nice little cotton balls in there, how much bark was used?
 
Jailbird5000
#12 Posted : 2/1/2015 2:37:20 PM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
Spaced Out 2 wrote:
Nice little cotton balls in there, how much bark was used?

Thanx! 100g of ACRB. I'm definitely stoked to have been successful on my first try, not sure about the yield though. I'll post a pic after I scrape it up later. This is a very exciting moment for me as I have still not experienced this. A bit nervous about trying it for the first time without a guide since no one around here has either. Preparing myself with music and meditation.
 
Spiralout
#13 Posted : 2/1/2015 2:51:31 PM

DMT-Nexus member


Posts: 600
Joined: 13-Dec-2013
Last visit: 11-Jun-2023
Looks good man, glad you got it right the first go-around!!

Wish you well on your travels, keep us updated!

Love
 
fatherseb
#14 Posted : 2/1/2015 2:59:36 PM

DMT-Nexus member


Posts: 54
Joined: 03-Jan-2015
Last visit: 22-Feb-2024
Congratulation!
I was just in the same situation as you are now some days ago. First extraction. First journey.
I´m glad I did it. Enjoy the ride.
 
JustCurious.
#15 Posted : 2/1/2015 5:02:31 PM

DMT-Nexus member


Posts: 157
Joined: 06-May-2012
Last visit: 13-Jun-2020
Just make sure you give it plenty of time to dry under a fan and also use a razor blade for scraping, it is worth going to buy one if you haven't. If you don't leave it to dry for long enough it could be a little slimy when you scrape it and it will all clump together.
 
JustCurious.
#16 Posted : 2/1/2015 5:05:51 PM

DMT-Nexus member


Posts: 157
Joined: 06-May-2012
Last visit: 13-Jun-2020
And you should be stoked !

I did this exact tek with MHRB a couple days ago and I got an emulsion in the mini A/B...

So be glad it worked on your first time ! Thumbs up
 
Jailbird5000
#17 Posted : 2/1/2015 8:42:35 PM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
My own piece of Triforce! (Not sure on weight cuz I don't have my jewlers scale yet, but surely that's close to a g.?
Jailbird5000 attached the following image(s):
20150201_143429.jpg (1,697kb) downloaded 79 time(s).
 
JustCurious.
#18 Posted : 2/1/2015 8:45:32 PM

DMT-Nexus member


Posts: 157
Joined: 06-May-2012
Last visit: 13-Jun-2020
Jailbird5000 wrote:
My own piece of Triforce! (Not sure on weight cuz I don't have my jewlers scale yet, but surely that's close to a g.?


I don't know...

DMT is sometimes deceptively light, I have been disappointed when I have weighed spice in the past and it appears to be A LOT less then I thought.
 
Jailbird5000
#19 Posted : 2/1/2015 8:51:11 PM

DMT-Nexus member


Posts: 22
Joined: 31-Jan-2015
Last visit: 02-Feb-2025
JustCurious. wrote:
Jailbird5000 wrote:
My own piece of Triforce! (Not sure on weight cuz I don't have my jewlers scale yet, but surely that's close to a g.?


I don't know...

DMT is sometimes deceptively light, I have been disappointed when I have weighed spice in the past and it appears to be A LOT less then I thought.

You're right. This stuff is super fluffy! I'm definitely happy to have any results for my first attempt! I owe a big thanx to this whole community for the sharing of knowledge and wisdom that got me here!
 
Spiralout
#20 Posted : 2/1/2015 9:26:00 PM

DMT-Nexus member


Posts: 600
Joined: 13-Dec-2013
Last visit: 11-Jun-2023
Nice man!

If its very fluffy that might not be a gram but its gotta be close. I don't even use a scale, I infuse herbs with my spice (I get goo since I'm using acacia confusa and don't freeze precipitate or separate the nmt (methyltryptamine) which is also psychoactive yet less potent, from the dmt.) I then start with small amounts of infused herbs to see how potent it is and work my way up. Once I'm familiar with my blend I can confidently grab a pinch and smoke how ever much I feel I'd like to smoke.

I also just eyeball out my doses of goo though; if your going to eyeball just start low. I also feel like you should start with low doses when unfamiliar with working with the spice. Just get a feel for it, get your feet wet, and wade in as slowly, carefully, respectfully as you feel.


Work with it wisely and remember you have all the time (and material!) in the universe and there is no rush. Glad to here your journey is going smoothly, keep us updated! Love
 
12NEXT
 
Users browsing this forum
Guest

DMT-Nexus theme created by The Traveler
This page was generated in 0.031 seconds.