DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
Spiritofspice wrote:DreaMTripper wrote:Hey EW have you tried pulling from the solution with xylene or toluene (or something that will pull full spectrum) after the final baseing and naptha pulls then evaporating it to see if there are any other alkaloids that could be yielded? I wonder what would happen if the original base soups was pulled with toluene then back salted (The EW tek). Then based and pull with napatha I wonder if yields could be increased. Very interesting , but what I do is I do five or six pulls with the mini ab then cool slowly then fully evape in a ventilated room to get fairly pure glass shard crystals , then over then next 2-3days do pulls on the orig base soup and also let it cool and evape fully to get a very brown crystaline wax with the most unusual texture , it's absolutely beautiful to look at and smoalk pure bliss 
|
|
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
Spiritofspice wrote:Brown and waxy you say.
This is what I pull with napatha mixed with 4% toluene.
Smoalks awesome and is extremely potent and I think has a unique personality.
Even in the Wiki there is a mention of the potent wax.
That's the stuffff 
|
|
|
DMT-Nexus member
Posts: 6 Joined: 13-Jul-2014 Last visit: 09-Oct-2017 Location: Off the grid
|
Are you sure the half gallon jug, used for the A/B soup, was HDPE2?
|
|
|
DMT-Nexus member
Posts: 1669 Joined: 10-Jul-2012 Last visit: 07-Sep-2019 Location: planet earth
|
IMO it would still contain the nmt as I don't remove or wish to remove wth dry ice ,
in my last extraction ..
At first.. i just caused an over saturated effect and poured off the napatha into another jar and then evaporated the wet crysyals till powder dry..
Once durring a re crystalization using a freezeer..I seemed to notice a more pure NN DMT effect when i tryed the product..it seemed more intense on come up and very visual eyes open or closed..
Ive been under the beleife that re crystalizing acacia causes a more pure NNDMT product..posibly with only traces of NMT...
.
Ill try to put photos of my over saturated jar of crystals and other pics below...
|
|
|
DMT-Nexus member
Posts: 406 Joined: 10-May-2014 Last visit: 08-Jan-2020
|
shakan27 wrote:what would be the procedure for using more material? say i wanted to start with 200g acrb or 400g? im not doing a commercial batch i would just like to save time It has been found that doing smaller extractions. Like 50-100g at a time seems to yield more then larger ones. Its worth it to take your time. That moment when you wonder if this time you went too far....
Obviously everything discussed here is the fictional accounts of someone with an out there imagination. I mean really could any of these tales be real?
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
Al-Wasi wrote:shakan27 wrote:what would be the procedure for using more material? say i wanted to start with 200g acrb or 400g? im not doing a commercial batch i would just like to save time It has been found that doing smaller extractions. Like 50-100g at a time seems to yield more then larger ones. Its worth it to take your time. I'll second that  Although I will add you could do 150g in the same 2ltr bottle just place more acidic water for the acid soak say 750ml of ph 2-3 water , then around 120g salt in the saline water , same amount lye , although IMO I put say 55-60grms lye ......and everything else keep the same ..
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
shakan27 wrote:thanks guys! this thread has been a great help  edit: i also wanted to add that i did all my pulls with hexane then after i had that precipitating in the freezer i did a 50ml toluene pull off of the initial base soup and a 50ml pull off of the base soup from the mini ab, i combined these and got 300mg of hard yellow wax that smells the same as the white xtals. is this wax active? im a lil scared to try it Yes
|
|
|
DMT-Nexus member
Posts: 36 Joined: 05-Apr-2013 Last visit: 15-Nov-2017
|
thanks earthwalker
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
shakan27 wrote:just wanted to drop a helpful hint, i noticed that during the back salting(?), step two of the mini a/b, after i had added the dmt containing nps to the acid water, the ph of the water jumped to about 9.5-10. leading me to believe that the basic dmt freebase had depleted the hcl, so i added more acid water till the ph was a neutral 7. this increased my yield by .5 grams over my previous run. Couldn't have ! You need a ph of 2-4 for the dmt to migrate to the water then you discard the nps then re basify to repull with new nps ...
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
shakan27 wrote:Earthwalker wrote:shakan27 wrote:just wanted to drop a helpful hint, i noticed that during the back salting(?), step two of the mini a/b, after i had added the dmt containing nps to the acid water, the ph of the water jumped to about 9.5-10. leading me to believe that the basic dmt freebase had depleted the hcl, so i added more acid water till the ph was a neutral 7. this increased my yield by .5 grams over my previous run. Couldn't have ! You need a ph of 2-4 for the dmt to migrate to the water then you discard the nps then re basify to repull with new nps ... sorry my post wasnt very clear. the water was at a ph 2 when i initially added the nps then it went up to 9.5-10. wouldnt the ph of the water become more neutral as the basic dmt freebase is converted to dmt hcl? IMO the acidic water will stay very acidic , it has to stay in the low 4s , otherwise if it didn't stay at ph 9 it defeats the purpose of the mini AB , other wise you're dmt would stay in the nps In which you discarded , unless you're just doing a wash ??
|
|
|
DMT-Nexus member
Posts: 228 Joined: 09-Nov-2013 Last visit: 16-Oct-2015
|
Thank you for this tek ! I just have one question : since I lack ph meters right now, how much of 31,45% HCl should I add to the starting mixture and last one to get the desired ph ?
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
Pixar wrote:Thank you for this tek ! I just have one question : since I lack ph meters right now, how much of 31,45% HCl should I add to the starting mixture and last one to get the desired ph ?
Um I couldn't tell without a ph meter as I use normal hydrochloric acid and with that I use roughly a small cap full , but just to be sure a ph meter is a great tool to have & there cheap as chips "$10" on eBay so I'd use normal white vinegar just to be sure ,
|
|
|
DMT-Nexus member
Posts: 524 Joined: 12-May-2010 Last visit: 10-Mar-2022 Location: canada
|
well done, thank you for sharing this pictorial. "science never proves anything; you can never duplicate an event precisely at the same moment in time as the initial event. science can only show correlation from the evidence and data derived from it." -benzyme
โ Donate to the Nexus! โ
|
|
|
PuddinTane
Posts: 81 Joined: 29-Nov-2008 Last visit: 30-Apr-2015 Location: Central California
|
What is the reason for adding salt before the lye is added? "Keep your friends close and your enemies dismembered."
Lowjackal original quote
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
lowjackal wrote:What is the reason for adding salt before the lye is added? It gives the water a charge that pushes the dmt out in the first 4-5 pulls , that's my understanding anyway , hope it help ... You can read up more about it in cybs max-ion Tek papers that he submitted .....
|
|
|
DMT-Nexus member
Posts: 228 Joined: 09-Nov-2013 Last visit: 16-Oct-2015
|
Earthwalker wrote:Pixar wrote:Thank you for this tek ! I just have one question : since I lack ph meters right now, how much of 31,45% HCl should I add to the starting mixture and last one to get the desired ph ?
Um I couldn't tell without a ph meter as I use normal hydrochloric acid and with that I use roughly a small cap full , but just to be sure a ph meter is a great tool to have & there cheap as chips "$10" on eBay so I'd use normal white vinegar just to be sure , Ok so I ended up using a CUP of HCl loll (just had to use a lot more NaOH). In the end it seems to have worked out fine.. Not done pulling though so yield is roughly half of 1.7g but quality seems to be very good. I will try posting pics Oh and btw is it fine if I let my bark in the basic solution for a few days ?.. It wasn't very fine so I though this could help Thank you Edit : first picture had a purification step to it an second did not.. I noticed the crystals in the first pic we're sticky so I mixed it up with muleine.. Second picture is very white and powdery (not sticky at all).. What do you think may have made the first pics crystal sticky ? Plant fats not present after more pulls ? Pixar attached the following image(s):  image.jpg (2,054kb) downloaded 1,250 time(s). image.jpg (2,141kb) downloaded 1,249 time(s).
|
|
|
DMT-Nexus member
Posts: 995 Joined: 08-Dec-2013 Last visit: 24-Apr-2022
|
Very nice Pixar , I like doing a full evaporation over night to get these beauty's Earthwalker attached the following image(s): image.jpg (563kb) downloaded 1,251 time(s). image.jpg (413kb) downloaded 1,234 time(s). image.jpg (623kb) downloaded 1,223 time(s). image.jpg (671kb) downloaded 1,215 time(s).
|
|
|
DMT-Nexus member
Posts: 228 Joined: 09-Nov-2013 Last visit: 16-Oct-2015
|
Mmm beautiful ! Have you ever happened to get crystals that we're sticky after the first few pulls ?
|
|
|
DMT-Nexus member
Posts: 463 Joined: 21-Dec-2013 Last visit: 28-Dec-2019
|
The mini A/B gives much cleaner results than a Re-x. One addition.... in between Step3 and Step4, I filtered thru coffee filters to get the last bits of gunk out. Make sure the coffee filters you run some distilled water thru first, and then some more at the end to flush anything that may be trapped in filter. Throughout recorded time and long before, trees have stood as sentinels, wise yet silent, patiently accumulating their rings while the storms of history have raged around them --The living wisdom of trees, Fred Hageneder
|
|
|
ThGiL fO TiRipS
Posts: 2021 Joined: 26-Feb-2011 Last visit: 07-Feb-2023 Location: Earth
|
I wonder how would this tek work with MHRB. Anyone tried that ? We are each of us angels with only one wing, and we can only fly by embracing one another.
*********
We are all living in our own feces.
|