DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
swims cat just mixed 100g's powdered MHRB into his basified solution of water+100g's of NaOH and has stirred/mixed and put it away for a an hour or so. swims cat wanted me to post this here in case he runs into any problems and also just to document the progress of his extraction. In about 45 minutes to an hour swims cat will be adding 100ml's of naphtha and moving on to the next stages of the process. swims cat hopes to yield some beautiful xstals for further research into hyperspace. I will post back as soon as swims cat updates me on what hes up to. wish him luck. All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
|
|
DMT-Nexus member
Posts: 14191 Joined: 19-Feb-2008 Last visit: 15-Nov-2024 Location: Jungle
|
advice: use less naphta, make more pulls.. make like 50ml warm naphtha pulls.. this way you can straight away stick your naphtha in the freezer, because it will be saturated enough. If you use too much naphtha, little dmt will crash out, so you will have to evap some of your naphtha before.. so better make more (like 6) and smaller pulls
Remember to make many cycles of mixing and letting separate before pulling the solvent, so that as much dmt as possible has been dissolved in it.
good luck!
|
|
|
Barry
Posts: 1740 Joined: 10-Jan-2010 Last visit: 05-Mar-2014 Location: Inside the Higgs Boson
|
Use more lye imo, also if you are using a baster for pulling i would recommend not using 50ml of naptha for pulls, use around 80ml or so.
|
|
|
DMT-Nexus member
Posts: 14191 Joined: 19-Feb-2008 Last visit: 15-Nov-2024 Location: Jungle
|
the trick is to first crudely pass all the naphtha + possibly some of basified liquid to a tall thinner container.. then separate accurately until the last bit, and throw it back in the main container.. then you dont have to use much naphtha and separation is easy
|
|
|
The Dude
Posts: 481 Joined: 23-Feb-2010 Last visit: 12-Jun-2017 Location: ♑
|
endlessness wrote:the trick is to first crudely pass all the naphtha + possibly some of basified liquid to a tall thinner container.. then separate accurately until the last bit, and throw it back in the main container.. then you dont have to use much naphtha and separation is easy YES!!! that is the key to doing small pulls. Dude likes to use tall vials bout 1" in diameter, perfect for it! this is a MUST for STB *We are now at a phase of human development where we have accumulated an enormous amount of knowledge through scientific research in the material world. This is very important knowledge, but it must be integrated. -Hoffman *A young man who wishes to remain a sound Atheist cannot be too careful of his reading -C.S. Lewis cephalopods are enlightened -benzyme T R I P S I T
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
Swim decided to go with 80ml's instead of 100. the naphtha has now been added and swims cat is inverting/mixing the soup every 15-20 minutes. swims cat also has his mimo soup jar sitting in a hot water bath in between mixing to aid in extraction. Quote: Dude likes to use tall vials bout 1" in diameter, perfect for it!
yes, swim has a perfect glass container that he bought from an organic food store. its about 1.5" in diameter and about 3" tall. that is what he plans on using for this extraction. --- update: the first pull has been pulled and placed into the freezer. swim is hoping for a great yield. All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
swim just took his first pull out of the freezer and there is definitely a nice amount in there already. swim poured off the naphtha back into the mimo soup and the container is currently in the fridge drying for a bit. swim is getting tired. he is going to have to finish up tomorrow. things are lookin good tho. swim was wondering.. What is an average yield for 100G's mhrb using this nomans tek? All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
Barry
Posts: 1740 Joined: 10-Jan-2010 Last visit: 05-Mar-2014 Location: Inside the Higgs Boson
|
If you get a gramme then that would be a result
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
Alright cool, that is about what swim thought. The first pull yielded about 150mg's and there were tons of crystals floating around in the naphtha that didnt stick to the glass so i know i will be pulling a good amount more. swim has put the second pull into the freezer and he will update me with results soon. All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
Barry
Posts: 1740 Joined: 10-Jan-2010 Last visit: 05-Mar-2014 Location: Inside the Higgs Boson
|
Are you going to re-x whatever you yield?
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
no. its already pretty clean. im satisfied. nice off-white color. All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
Barry
Posts: 1740 Joined: 10-Jan-2010 Last visit: 05-Mar-2014 Location: Inside the Higgs Boson
|
White doesn't mean clean If it's harsh to smoke i would recommend a re-x or next time you do an extraction do a sodium carbonate wash before you freeze My second extraction was pure white and i thought wow! this looks great but smoking it was harsh and a re-x sorted it amazingly, peace bro.
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
Ok, i wasnt aware. it does seem a bit harsh, but not horribly so. swim will certainly take this into consideration and probably give it a try in the future. thanks for the help. All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
Barry
Posts: 1740 Joined: 10-Jan-2010 Last visit: 05-Mar-2014 Location: Inside the Higgs Boson
|
No probs Compare the white spice in my pre and ppost re-x pics, in the first ones the white spice is very pwdery and not what you want. You want a nice crystally appearance like the second pics . https://www.dmt-nexus.me...aspx?g=posts&t=11055https://www.dmt-nexus.me...aspx?g=posts&t=11097
|
|
|
RUN DMT
Posts: 477 Joined: 28-Nov-2009 Last visit: 29-Jan-2023 Location: The Infinite Hotel
|
endlessness wrote:the trick is to first crudely pass all the naphtha + possibly some of basified liquid to a tall thinner container.. then separate accurately until the last bit, and throw it back in the main container.. then you dont have to use much naphtha and separation is easy I just learned that trick the other week there. Saves bags of time and you dont get repetitive strain on the arms and hands going from jar to dish a million times. "accept the possibility that you may never come back, then your mind is truly open." ____________________________________________________________________________________
The playful ballad of the sacred salad.
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
the third pull has now been placed into the freezer and the 1st/2nd pull have been dried and put away.
*the third pull has now been scraped and dried and added to the rest. its weighing in at 300mg's right now. these are small 30-50ml pulls so it will probably take another 3-4 pulls to get the rest im guessing. The fourth pull is now in the freezer. I will report when i wake up. oh yea, i also smoked some and have a report to type in when i awake as well. All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
SWIMS experience report can be found here.. https://www.dmt-nexus.me...aspx?g=posts&t=11592
The fourth pull has now been scraped and added to the lot. Its now weighing in at just about 400mg's. swim seems to be averaging about 100mg's per pull, but keep in mind once again he is doing very small pulls (30-50mls at the most) due to lack of space in his freezer at the moment as well as the temperature. (doesn't get super cold, but it works)
The fifth pull has now been placed into the freezer for precipitation. The yields are starting to decrease so swim is guessing probably 3 more and he should have all of it. swim is also guessing that he will have around 0.7g's by the end of it. not great but not bad. --- the fifth pull has now been taken out of the freezer and placed in the the refrigerator to properly decrease in temperature so condensation doesnt form on the glass and redissolve any of the xstals. swim cant wait to scrape up the results. the snow seems to keep coming. All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
DMT-Nexus member
Posts: 178 Joined: 26-Mar-2010 Last visit: 26-May-2013 Location: Middle Of The Jungle
|
the soup has now stopped producing xstal. final results weigh in at a little over 500mg's. hopefully swim can get it up to a gram next time. thanks again guys for your help and for reading. its been wonderful. and still is All above posts are absolutely fictional and have nothing to do with actual reality whatsoever. If you are waiting for "that moment", that moment is now.
|
|
|
Barry
Posts: 1740 Joined: 10-Jan-2010 Last visit: 05-Mar-2014 Location: Inside the Higgs Boson
|
My first extraction was pitiful, things will get better as you improve your tek Nice one fella
|
|
|
☂
Posts: 5257 Joined: 29-Jul-2009 Last visit: 24-Aug-2024 Location: 🌊
|
DeMenTed wrote:White doesn't mean clean If it's harsh to smoke i would recommend a re-x or next time you do an extraction do a sodium carbonate wash before you freeze My second extraction was pure white and i thought wow! this looks great but smoking it was harsh and a re-x sorted it amazingly, peace bro. White is certainly clean enough, no reason to clean it and possibly loose some of your yield if its already white in the first place..unless you picked up some of the black goop in your pulls, in which case the spice probably wont be white anyway. I and others i know actually like the yellowy tinted spice as opposed to white..And the harshness of the smoke seems to be more dependent on the smoking method than the spice. I've never noticed a difference in harshness between white, yellow, or anywhere in-between when using the same smoking method for all. I really can't imagine white spice being a harsher smoke than super white spice lol
<Ringworm>hehehe, it's all fun and games till someone loses an "I"
|