We've Moved! Visit our NEW FORUM to join the latest discussions. This is an archive of our previous conversations...

You can find the login page for the old forum here.
CHATPRIVACYDONATELOGINREGISTER
DMT-Nexus
FAQWIKIHEALTH & SAFETYARTATTITUDEACTIVE TOPICS
Phalaris Aquatica extraction Options
 
titus
#1 Posted : 11/8/2020 3:53:25 AM

DMT-Nexus member


Posts: 82
Joined: 22-Aug-2020
Last visit: 04-Dec-2023
A friend has been growing some phalaris aquatica cv. Australian from seed recently, for about 2 1/2 months. At first, fertilizer was not used, however in the second month a strong solution of carp-based fertilizer was used every one in a while. The grass had been growing in shade for the whole time. In the week prior to harvest, my friend stopped watering the phalaris, and some significant stressing was observed. They harvested around 35g at 6am, and froze the grass before going back to sleep. Later that day the extraction was done, the method of which wasn't precise by any means, but it went a little like this:

- finely chop the frozen grass and add to 1L of a weak citric acid solution
- boil until reduced by 1/4.
- filter off grass and set aside the liquid, then add the grass material to another 1L of new citric acid solution
- boil this until reduced to around 500mL
- filter, then combine the boils and boil down to around 250mL.
- add to a jar and combine with 30g sodium carbonate, being careful not to add too much at once.
- enough peanut oil is added to reach the top of the jar, and it is left to sit for 1/2-1 hours.
- peanut oil is removed, and salting is done 3x with small amounts of white vinegar.
- enough sodium carbonate is added to the vinegar pulls to make a paste, and to this a small amount of naphtha is added, stirred thoroughly, then filtered off. Around 3 naphtha pulls were done.
- naphtha pulls are added to a small jar and put in the freezer.

So far, my friend has noticed a significant amount of white crystals forming at the bottom of the jar. They removed a small sample with a razor to check its properties; it was solid at room temperature, but quickly began to melt when a small amount of heat was added. My friend isn't totally confident this is DMT + some 5-MeO-DMT (as one would have to get quite lucky to get a good yield from seed-grown phalaris), but they are hopeful. If it is, they are now very grateful for their new phalaris friends Big grin
 

Explore our global analysis service for precise testing of your extracts and other substances.
 
Seeingisbelieving
#2 Posted : 11/8/2020 4:11:41 AM

DMT-Nexus member


Posts: 576
Joined: 30-Oct-2020
Last visit: 23-Jan-2022
I am super stoked for your friend lol! GO SMOALK some grass with your buddies and report back ASAP!
 
titus
#3 Posted : 11/8/2020 4:27:32 AM

DMT-Nexus member


Posts: 82
Joined: 22-Aug-2020
Last visit: 04-Dec-2023
My buddy is going to bioassay in about a week, and in the meantime they'll do a few more pulls (especially on the sodium carb paste that was kept after being washed with naphtha; my friend suspects there would be a fair amount of freebase still trapped in there).
 
emtisoul
#4 Posted : 2/20/2021 12:48:21 PM

DMT-Nexus member


Posts: 3
Joined: 20-Feb-2021
Last visit: 11-Oct-2023
Any news for the bioassay?
Also if i dont want to use naphtha to pull with, is there any alternative solution.
I have soda water, sunflower oil and vinegar. Is it possible to extract with just what i have?
If so does this extraction safe? Considering there maybe toxic alkaloids like gramine?
 
downwardsfromzero
#5 Posted : 2/20/2021 11:49:36 PM

Boundary condition

ModeratorChemical expert

Posts: 8617
Joined: 30-Aug-2008
Last visit: 07-Nov-2024
Location: square root of minus one
titus wrote:
So far, my friend has noticed a significant amount of white crystals forming at the bottom of the jar. They removed a small sample with a razor to check its properties; it was solid at room temperature, but quickly began to melt when a small amount of heat was added.
This sounds like hydrated sodium acetate.




β€œThere is a way of manipulating matter and energy so as to produce what modern scientists call 'a field of force'. The field acts on the observer and puts him in a privileged position vis-à-vis the universe. From this position he has access to the realities which are ordinarily hidden from us by time and space, matter and energy. This is what we call the Great Work."
― Jacques Bergier, quoting Fulcanelli
 
titus
#6 Posted : 2/22/2021 10:54:55 AM

DMT-Nexus member


Posts: 82
Joined: 22-Aug-2020
Last visit: 04-Dec-2023
I forgot about this thread, sorry about that! So, an update:
This extraction didn't work, the product was definitely not dmt or anything related. The 35g was obviously wayyy too small for an extraction, although the method for the most part was fine. I tried another extraction recently with around 100-150g worth of fresh phalaris that was collected over around 6 weeks. Every 2 weeks, I would collect around 50g of regrowth, freeze and thaw it a few times, then boil it. Basify with sodium carbonate, extract with vegetable oil, then save and freeze the oil. This was done 3 times (the last harvest I only got 35g, but it was dried and the grass was heavily stressed), and then a vinegar salting was done with the combined oil pulls. The vinegar was then basified with sodium carbonate (not made to a paste this time), and around 3 pulls were done with naphtha. This was then evaporated, put in the freezer, evaporated, etc. until I got precipitates.

This time, I was lucky enough to get something, although it was a tiny amount (see photo). It was a sweet smelling, yellow oil at room temperature. I tried smoking it, but all I got was a sweet taste, but no significant vapor. However, this isn't really a disappointment; the period during which I harvested the grass (December-Jan) is reported to be a fairly poor time for tryptamine content in the Southern hemisphere, and the highest content was recorded during April (which is fast approaching!).

I'll try and do the same thing as I did with this extraction over the next 2 months, collecting grass every 2 weeks, although I'll probably just freeze the grass until one final extraction this time. Since I've already harvested 50g, this should get me around 200-300g of phalaris, which I hope will yield something a bit more substantial. I'll try to give an update once this has been completed. Fingers crossed Very happy
titus attached the following image(s):
IMG_E1070[1].JPG (476kb) downloaded 127 time(s).
 
titus
#7 Posted : 2/22/2021 11:02:32 AM

DMT-Nexus member


Posts: 82
Joined: 22-Aug-2020
Last visit: 04-Dec-2023
emtisoul wrote:
Any news for the bioassay?
Also if i dont want to use naphtha to pull with, is there any alternative solution.
I have soda water, sunflower oil and vinegar. Is it possible to extract with just what i have?
If so does this extraction safe? Considering there maybe toxic alkaloids like gramine?


You could use d-Limonene in place of naphtha (orange oil is ~90% d-Lim as far as I know), but it's pricy. If you turn the vinegar pulls into a paste before completely letting it dry, you could use acetone, but beware that this will pull gramine, so only do this if you're sure of the tryptamines in your grass (I wouldn't recommend this).
 
emtisoul
#8 Posted : 5/12/2021 12:28:54 AM

DMT-Nexus member


Posts: 3
Joined: 20-Feb-2021
Last visit: 11-Oct-2023
Nvm
Please update us with the news if there any
 
dreamer042
#9 Posted : 5/12/2021 12:46:53 AM

Dreamoar

Moderator | Skills: Mostly harmless

Posts: 4711
Joined: 10-Sep-2009
Last visit: 21-Nov-2024
Location: Rocky mountain high
Cut the oil, replace the soda carb with sodium hydroxide, and pull directly to the naphtha. Save yourself some trouble and potential product loss in all those extra steps.
Row, row, row your boat, Gently down the stream. Merrily, merrily, merrily, merrily...

Visual diagram for the administration of dimethyltryptamine

Visual diagram for the administration of ayahuasca
 
Bisy
#10 Posted : 5/12/2021 7:04:38 AM

DMT-Nexus member


Posts: 280
Joined: 09-Jan-2021
Last visit: 24-Mar-2023
dreamer042 wrote:
Cut the oil, replace the soda carb with sodium hydroxide, and pull directly to the naphtha. Save yourself some trouble and potential product loss in all those extra steps.



I have to agree here. We are very excited about your ambition and support your endeavor entirely. But I just don't think we are ready for food safe experimentation with phalaris. We need to figure out how to get consistent yields, or just useable yields first. If you do an extraction and feel like you've got something significant, try to repeat it with food grade process.
Everything i say is fictional, I just wanna be cool and fit in.
 
Sidisheikh.mehriz
#11 Posted : 5/12/2021 1:39:36 PM

DMT-Nexus member


Posts: 290
Joined: 06-Feb-2021
Last visit: 27-Nov-2024
Location: North Africa
I've tried the oil tek on 400g phalaris before using olive, sodium carbonate and white vinegar. I end up with some semi-crystalline hygroscopic light brown residue that smelled sweet and floral. On vaping it on a peice of aluminium foil it barely had any effects. The same grass cooked into a tea and drank with harmala extract was definitely active and made fora a very pleasant trip so i dont think the problem is in the grass alkaloid concentration but it's in the extraction technique. I will soon extract again with dichloromethane and see how ot goes.
 
titus
#12 Posted : 6/6/2021 2:50:59 AM

DMT-Nexus member


Posts: 82
Joined: 22-Aug-2020
Last visit: 04-Dec-2023
Bisy wrote:
dreamer042 wrote:
Cut the oil, replace the soda carb with sodium hydroxide, and pull directly to the naphtha. Save yourself some trouble and potential product loss in all those extra steps.



I have to agree here. We are very excited about your ambition and support your endeavor entirely. But I just don't think we are ready for food safe experimentation with phalaris. We need to figure out how to get consistent yields, or just useable yields first. If you do an extraction and feel like you've got something significant, try to repeat it with food grade process.


Yep, I would think so too. Besides not necessarily working great, the oil was just a complete mess... but I tried another method recently and got something interesting happening. I boiled around 50g of brachys + aquatica in 3L of water (with added citric acid, amount not specific), and reduced it to around 100mL. Then I added sodium carbonate until the solution was neutralised and went a bit further until the solution turned dark. I then evaporated this in the oven at around 70C until the solution was pretty thick and there were fats and whatnot crashing out of solution. Now here is where things get interesting...

I poured off the solution into a container and added some acetone. I'm not sure on the amount but it was around twice the volume of the reduced solution. After it was added, the container was shaken pretty thoroughly and to my surprise, when the layers separated, the bottom had congealed into a solid mass. This meant I could pour off the acetone, add more and repeat. The acetone definitely picked up some of this fat, but for the most part the fats were insoluble; they were very soluble in neutral water though. From here I evaporated the acetone until I could no longer smell it, although there was still water. I then took this solution and added a small amount of warm naphtha, separated, removed the naphtha, and repeated around 3 times. The combined naphtha pulls were evaporated and yielded maybe around 10mg of a light yellow oil. I didn't bioassay it but I soaked it into a tissue then lightly feathered a lighter below (yes, this is not the best idea), and a thick white smoke was produced. I tried feathering the lighter below other parts of the tissue just for completeness's sake and nothing happened.

This was just a small test, but it was a lot more promising than anything I'd ever gotten from my previous method. Has anyone else ever noticed fats congealing when acetone is added to solution? This seems like it might be pretty useful.
 
downwardsfromzero
#13 Posted : 6/6/2021 11:21:57 PM

Boundary condition

ModeratorChemical expert

Posts: 8617
Joined: 30-Aug-2008
Last visit: 07-Nov-2024
Location: square root of minus one
Interesting results, that sounds worth duplicating.
Quote:
The acetone definitely picked up some of this fat, but for the most part the fats were insoluble; they were very soluble in neutral water though.
Then it's not fat, at least not the bit that dissolves in neutral water. Maybe protein or carbohydrate. The 'fats' meme is getting a bit tired. ←That was meant to be a link but I couldn't find the right thread!




β€œThere is a way of manipulating matter and energy so as to produce what modern scientists call 'a field of force'. The field acts on the observer and puts him in a privileged position vis-à-vis the universe. From this position he has access to the realities which are ordinarily hidden from us by time and space, matter and energy. This is what we call the Great Work."
― Jacques Bergier, quoting Fulcanelli
 
 
Users browsing this forum
Guest

DMT-Nexus theme created by The Traveler
This page was generated in 0.027 seconds.