Arrived, very fast shipping. 120 Euro (all in, transport included). We have a fine Glass Vapor Genie dealer on Euro grounds now 
|
|
|
The GVG is what everybody tells: ultimate efficiency !
What a great tool! Impressive.
So I got it send from that Holland/Amsterdam shop, but I wonder if people who bought out of USA had to register as a genuine client? Seems I got no linkage for such an act.
Still a bit shy to use a torch flame, it worked alright, but still afraid to make cracks in the glass.
|
|
|
Jees wrote:
Still a bit shy to use a torch flame, it worked alright, but still afraid to make cracks in the glass.
I strongly recommend the " arc torch lighter " if you haven't got one already, It works perfectly pointing directly downwards, so you can make sure flame is directed at ceramic disc and not the glass. Always works perfectly for me  “Psychedelics are illegal not because a loving government is concerned that you may jump out of a third story window. Psychedelics are illegal because they dissolve opinion structures and culturally laid down models of behaviour and information processing. They open you up to the possibility that everything you know is wrong.”
Terrence Mckenna
|
|
|
Thanks for the confidence Y. That ARC lighter seems to come as ZICO too at Ebay.  but more shipping $$ that cost $$ for EU  A same angled-shaped one, HONEST, pretty cool fitting GVG style (organic round) 
|
|
|
Anybody know a reputable site to buy the GVG online in the US? The official vaporgenie has been out of stock for the past week. Thanks!
|
|
|
TiHKAL wrote:If you rip too hard there's a chance of you pulling your DMT through the copper mesh or other kind of layers. That's what happened to a friend of mine when he was using his GVG with copper mesh.
When buying copper mesh you should pay attention to buy ribbon style copper instead of round wires.
Also where is "here" that you cannot buy ceramic discs? Using choreboy copper ribbon mesh..you can reduce chances of dmt falling through mesh if you simply compact the mesh with plyers to fit any shape bowl../ The more compacted ..the less chance of dmt falling through and getting wasted.. If you ..[compact or compress]..the mesh too tightly...much you wont be able to get ventalaition through it... Just be carefull to comprress the mesh just right...
|
|
|
aprobablewave wrote:Anybody know a reputable site to buy the GVG online in the US? The official vaporgenie has been out of stock for the past week. Thanks! Here's a direct link to the GVG sold by WickiePipes. They have a great reputation. GVG at WickiePipes
|
|
|
ziggus wrote:aprobablewave wrote:Anybody know a reputable site to buy the GVG online in the US? The official vaporgenie has been out of stock for the past week. Thanks! Here's a direct link to the GVG sold by WickiePipes. They have a great reputation. GVG at WickiePipes Thank you very much ziggus. I saw that site but wasn't sure about it. Problem is I just can't bring myself to shell out $100 for another piece right now. I ended up putting together my own similar vaporizer for $40 as described in https://www.dmt-nexus.me...aspx?g=posts&t=56074
|
|
|
I remember that some guy made a glass pipe extension to classic VG, but I can't seem to find that thread. Basically, if you do that, you don't even need GVG. The main advantage of GVG is that you can see if you're actually vaping spice or not.
|
|
|
|
|
|
|
|
|
|
|
has anyone tried the vapor buddie [buddy] its a cheaper imitation of the above pipe can get them for about $12 on the online auction site in the uk.they work very well for the price.
|
|
|
mr Whippy wrote:has anyone tried the vapor buddie [buddy] its a cheaper imitation of the above pipe can get them for about $12 on the online auction site in the uk.they work very well for the price. VaporGenie doesn't have a good opinion about them. They apparently use lead paint in their products. http://www.vaporgenie.com/vaporbuddy
|
|
|
Hello guys,
I am preparing for my first experience with DMT. The GVG should arrive at Thursday.
I want to use white DMT. I read that it can be done with 5-8 screens in the GVG and some on the top of the DMT.
Someone was also writeing about melting the DMT into a bit of the "Volcano easy valve liquid pad".
Which way should i prefer ?
peace
DoS
|
|
|
Use either a volcano liquid pad cut to fit, or this. Or a bed of herbs. Good luck!
|
|
|
Didn't know that ceramic filters...
Thank you :-)
|
|
|
does anyone have suggestions for using the classic vg? I've never tried dmt before and my first attempt (~10mg) gave me some intense close eyed visuals, things got warpy and stretchy looking, but that was about it. I was really high feeling for a bit after. Then I tried again with 25mg and didn't really feel anything besides my light sort of distorting/starting to droop/sag. The first time I held my bic directly to the ceramic thing and took one "draw" that was broken up but I held everything in my lungs the whole time. When I wasn't inhaling, the bic wasn't lit. It was pretty close to the method in a post I found that had a quote from gilbran2 The second time I tried to hit it as close as possible to how it was described in the first post in this topic, but got nothing. I sneezed right after taking the first hit so that might be why? next time I try I'm going to do about 10mg again since I know it works at that low of a dose, it's just a matter of doing it right? Or did I do it properly the first time and that's just what a 10mg dose does? When I'm hitting it and taking breaks from hits, do I not light? also, do I put the flame directly to the ceramic or above or...? I just don't want to waste everything on tripless trips since my pull only got 130mg Thanks
|
|
|
just wanted to point out an alternative Glass Vaporizer I built myself out of a chillum and a "ceramic insulator" in case you can't get or afford the original one. It works perfectly well and I am really happy with it... would not change for an original one at all. --> described in detail here.
|
|
|
ribbit01234 wrote:does anyone have suggestions for using the classic vg? I've never tried dmt before and my first attempt (~10mg) gave me some intense close eyed visuals, things got warpy and stretchy looking, but that was about it. I was really high feeling for a bit after. Then I tried again with 25mg and didn't really feel anything besides my light sort of distorting/starting to droop/sag. The first time I held my bic directly to the ceramic thing and took one "draw" that was broken up but I held everything in my lungs the whole time. When I wasn't inhaling, the bic wasn't lit. It was pretty close to the method in a post I found that had a quote from gilbran2 The second time I tried to hit it as close as possible to how it was described in the first post in this topic, but got nothing. I sneezed right after taking the first hit so that might be why? next time I try I'm going to do about 10mg again since I know it works at that low of a dose, it's just a matter of doing it right? Or did I do it properly the first time and that's just what a 10mg dose does? When I'm hitting it and taking breaks from hits, do I not light? also, do I put the flame directly to the ceramic or above or...? I just don't want to waste everything on tripless trips since my pull only got 130mg Thanks Get a small torch, much easier. And yes that sounds bout right for a 10, dont usually get much cevs myself with that small a dose. Make sure the vg has no more dmt in it before loading again so you know how much is in there. "Energy flows where attention goes" [Please review the forum Wiki and FAQ before posting questions]
|
|
|
So using a torch is much better? do I still hold it directly to the ceramic and just hit it like this: gilbran2 wrote:One problem might be that you’re inhaling too quickly. If you inhale too quickly, you’ll be out of breath before you’ve managed to melt, vaporize, and inhale a full dose. Here’s what I do:
1. Begin by taking a series of very deep, slow breaths. Inhale deeply, then exhale fully. Do this three times at least. (This not only oxygenates your blood, but has a nice pre-launch calming effect as well.)
2. As you start the last exhale, begin heating the GVG ceramic diffuser.
3. When every last bit of air is out of your lungs, slowly begin inhaling through the GVG, and keep the torch heating it, raising or lowering the flame to control temperature. It’s very important to inhale slowly.
4. If you’re doing everything right, after 5-10 seconds, the DMT will begin to vaporize. If you’re really doing everything right, the full dose will vaporize almost instantaneously. Don’t be alarmed when you feel the ultra-concentrated vapor enter your lungs.
5. Continue to slowly inhale, and when no more vapor is being generated, bring the flame even closer to the ceramic diffuser to ensure that everything has been vaporized.
6. Remove the flame, and draw a bit of cool air through the GVG into your lungs. This helps to hold the vapor for a longer period.
7. Hold the vapor in your lungs for as long as you reasonably can. ?? Also, my torch lighter is just one of thhe cheap 6 dollar ones. Will that work ok? This is what I'm going to try next and I won't hold back this time , I'm also going to quit using the micro g pen like you suggested in my other topic.
|